PVC PVDC Film for Pharmaceutical Packaging

Introduction

In the highly regulated pharmaceutical industry, product protection, regulatory compliance, and shelf life are paramount. One of the most relied-upon solutions that addresses all these demands is PVC PVDC film for pharmaceutical packaging. As global supply chains continue to evolve in 2025, packaging innovations like these are leading the way in securing drug efficacy, safety, and extended shelf life.

In this article, we’ll explore the structure, properties, applications, and market impact of PVC PVDC films in the pharma world, while highlighting Chalvo as a reliable source from China for top-quality pharmaceutical-grade rigid films.

 

PVC PVDC film is a rigid PVC sheet coated on one side with polyvinylidene chloride (PVDC) — the standard blister material for pharmaceutical packaging. The PVDC coating raises the moisture barrier to a water vapor transmission rate of ≤0.4–0.6 g/m² per 24 h, protecting tablets and capsules against moisture pickup, oxidation and light throughout their shelf life.

What Is PVC PVDC Film?

PVC PVDC film is a multi-layer rigid structure consisting of polyvinyl chloride (PVC) as the base and polyvinylidene chloride (PVDC) as the coating. The combination creates a packaging material that offers the excellent thermoformability of PVC and the high barrier properties of PVDC.

  • PVC Layer: Provides dimensional stability, thermoformability, and compatibility with pharmaceutical blister packing machinery.

  • PVDC Coating: Acts as a barrier layer to block oxygen, moisture, light, and gases, which can degrade sensitive pharmaceutical ingredients.

This synergistic film structure makes PVC PVDC one of the most used materials in blister packaging for tablets, capsules, and chewable supplements.


Technical Specifications

PropertyRange
Film WidthUp to 600 mm
PVC Thickness0.20 mm – 0.45 mm
Inner Core Diameter76 mm
Outer Roll Diameter≤500 mm
StructurePVC rigid base + PVDC coating
ApplicationPharmaceutical tablets, capsules, candy, chewing gum

PVC Base Film vs PVDC-Coated Grades: Barrier Comparison

Uncoated rigid PVC forms well but offers only limited moisture protection on its own. Laminating a PVDC coating onto the base film is what qualifies the laminate for pharmaceutical use. The values below follow the pharmaceutical packaging standard YBB 00222005-2015 (specification limit, with typical batch-tested results):

Grade (PVC base + PVDC coating)Total thicknessPVDC coating weightWVTR g/(m²·24h)OTR cm³/(m²·24h·0.1MPa)
PVC 0.25 mm + 60 g/m²0.28 ± 0.02 mm60 g/m² ±7%≤0.6 (tested 0.19–0.21)≤3.0
PVC 0.25 mm + 90 g/m²0.30 ± 0.02 mm90 g/m²≤0.4 (tested 0.16)≤3.0
PVC 0.30 mm + 90 g/m²0.35 ± 0.02 mm90 g/m²≤0.4 (tested 0.14)≤3.0
Uncoated PVC (reference)0.20–0.45 mm—limited barrier (qualitative)—

Reading the table: moving from a 60 g/m² to a 90 g/m² PVDC coating tightens the allowed WVTR from ≤0.6 to ≤0.4 g/(m²·24h) — the difference matters for hygroscopic tablets. For a deeper structural comparison of the two layers, see PVC vs PVDC film.

Key Features of PVC PVDC Pharmaceutical Films

1. Exceptional Barrier Performance

The PVDC coating significantly reduces:

  • Water vapor transmission rate (WVTR)

  • Oxygen transmission rate (OTR)

  • Aroma and gas permeation

This helps retain the chemical stability of active pharmaceutical ingredients (APIs), especially for moisture-sensitive and oxidation-prone drugs.

2. Superior Thermoformability

PVC offers excellent moldability, enabling deep cavities and consistent shapes across high-speed blister forming lines. Even with complex forms, the film maintains integrity and transparency.

3. Excellent Clarity and Printability

High transparency allows for visual inspection of products post-packaging, a crucial requirement in pharmaceutical compliance. Surface treatment allows easy sealing with aluminum foil and compatibility with flexographic printing.

4. Regulatory Compliance

Most films offered by reputable suppliers such as Chalvo are compliant with:

  • FDA regulations for direct contact with food and pharma

  • EU REACH and ROHS directives

  • GMP (Good Manufacturing Practice) standards


Application Areas

PVC PVDC film is primarily used in:

  • Pharmaceutical blister packs (capsules, tablets, lozenges)

  • Nutritional supplements

  • Functional confectionery (e.g., chewing gum)

  • Veterinary medicine

The film is favored for its long-term shelf stability, tamper evidence, and cost-effectiveness.


Why PVC PVDC Over Other Packaging Materials?

Comparison Table: PVC PVDC vs Alternatives

FeaturePVC PVDCAlu-Alu (Cold Form)PET/PEPaper Foil
Moisture BarrierHighExcellentModerateLow
Oxygen BarrierHighExcellentModerateLow
ThermoformabilityExcellentPoorGoodPoor
CostModerateHighLowLow
TransparencyYesNoYesNo
Shelf AppealHighLowHighLow

PVC PVDC films offer the best balance between performance and affordability, especially where cold-form foil (Alu-Alu) may be cost-prohibitive.


Chalvo: A Trusted Supplier of PVC PVDC Film for Pharmaceutical Packaging

Chalvo, based in China, is a trusted manufacturer and global exporter of pharmaceutical-grade PVC PVDC films. Known for stringent quality control and GMP compliance, Chalvo ensures that all rigid films:

  • Are produced using pharma-grade resins

  • Feature low bubble and vein content

  • Provide excellent heat sealing with lidding aluminum foil

  • Are available in customized roll sizes and thicknesses

Chalvo’s in-house engineering capabilities also allow for tailor-made solutions, such as adjusting PVDC coating weights for specific barrier levels.


Storage & Handling Guidelines

Proper storage extends the usability of PVC PVDC films:

  • Storage time: Up to 24 months under optimal conditions

  • Recommended temperature: 15°C – 25°C

  • Humidity control: Keep below 60% RH

  • Packaging: Keep in sealed original rolls

  • Post-use: Reseal unused portions in airtight packaging

Avoid exposure to direct sunlight or extremes of temperature, especially freezing conditions which can make PVC brittle.


Industry Trends in 2025

1. Regulatory Tightening

With Europe pushing forward PPWR (Packaging and Packaging Waste Regulation) and increasing calls for recyclable and sustainable blister packs, manufacturers are now exploring eco-friendlier alternatives. However, PVC PVDC remains widely used due to its unmatched performance in specific pharma categories.

2. Innovation in Coatings

Next-generation coatings are being introduced to:

  • Reduce the environmental footprint of PVDC

  • Maintain barrier performance with thinner coatings

  • Offer improved recyclability in pharmaceutical films

3. Market Growth

The global PVC PVDC pharmaceutical film market is projected to grow at 5.4% CAGR through 2030, driven by demand for cost-effective and high-barrier blister packaging in Asia-Pacific and Latin America.


Supplier Selection Checklist

Before sourcing, pharmaceutical brands and converters should evaluate:

CriteriaWhy It Matters
GMP ComplianceEnsures material safety for medical use
Barrier Data SheetsCompare OTR/WVTR performance
Coating WeightCustom coating weight affects cost and function
Regulatory CertificationsFDA, EU, ISO compliance required for global trade
Technical SupportOn-site engineering and testing support

Chalvo ticks all these boxes and offers a full suite of documentation and service support.


Final Thoughts

The role of PVC PVDC film for pharmaceutical packaging continues to be indispensable in 2025, particularly for solid oral dose forms requiring robust protection against environmental degradation. It strikes an ideal balance between formability, visibility, barrier protection, and cost-efficiency.

As sustainability pressures rise, PVC PVDC may face competition from newer recyclable films—but its unique performance makes it the backbone of pharma blister packaging today.

For pharmaceutical brands, contract packagers, and converters seeking a reliable partner, Chalvo’s PVC PVDC films offer an optimized solution backed by decades of experience, modern production lines, and global logistics.


Frequently Asked Questions

What does the PVDC coating do in blister film?

The PVDC layer is the barrier engine of the structure. Coated at 60–90 g/m² onto the PVC base, it brings the water vapor transmission rate down to ≤0.4–0.6 g/(m²·24h) and the oxygen transmission rate to ≤3.0 cm³/(m²·24h·0.1MPa) per YBB 00222005-2015, while the PVC base provides the rigidity and thermoformability that form the blister cavities.

What is the difference between PVC and PVC-PVDC film?

Plain rigid PVC thermoforms easily but has only limited resistance to moisture. PVC-PVDC is the same base film with a thin PVDC coating added on the sealing side, which raises the moisture barrier dramatically. See our dedicated comparison: PVC vs PVDC — what is the difference?.

Which PVDC grade should I choose for moisture-sensitive tablets?

As a rule of thumb from the spec limits: 60 g/m² coatings (WVTR ≤0.6 g/m²·24h) suit standard tablets and capsules; for hygroscopic or moisture-sensitive formulations choose a 90 g/m² grade (WVTR ≤0.4). CHALVO’s PVDC films cover both grades, and every production batch ships with a test report (COA).

What thicknesses are available for PVC PVDC film?

Common production structures include PVC 0.25 mm base with 60 or 90 g/m² PVDC (total 0.28 / 0.30 ± 0.02 mm) and PVC 0.30 mm base with 90 g/m² PVDC (total 0.35 ± 0.02 mm). Widths up to 600 mm on 76 mm cores support standard blister lines.

Contact us

At Chalvo, we understand the unique needs of businesses looking to enhance their packaging, marketing materials.

Our team is here to help you choose the right films that not only meet your functional needs but also help elevate your brand’s visual appeal. 

Leave a Reply

Your email address will not be published. Required fields are marked *